02/98 n/al 9.5. 001.01 our policy is one of continuous research and development. we therefore reserve the right to amend, without notice, the specifications given in this document. ordering information to order, quote appropriate product number from the tables on the following pages. l for simple and quick connection of pneumatic circuits l neat, compact design l precision machined for complete reliability l corrosion resistant, nickel plated technical data medium: compressed air operating pressure: vacuum - 15 bar dependent upon tube. operating temperature: -18? to +70? dependent upon tube. suitable tube sizes 4/2.5mm, 5/3mm, 6/4mm, polyurethane 8/6mm, 10/8mm, 12/10mm, 15/12.5mm extraflexible nylon tubing type: polyurethane, nylon 11* * consult our technical service for use with any other tubing. materials nut & body are nickel plated brass ??ring to nbr 70 sealing washers - polyamide 66 push-on tube fittings 24 series 4/2.5 - 15/12.5 od/id tube
n/al 9.5. 001.02 02/98 push-on tube fittings our policy is one of continuous research and development. we therefore reserve the right to amend, without notice, the specifications given in this document. straight adaptors and connectors straight male adaptor parallel bsp 24225 page 9.5.001.03 bulkhead connector tube to tube 24029 page 9.5.001.04 straight male adaptor taper bsp 24125 page 9.5.001.03 straight male adaptor with metric thread 24225 page 9.5.001.03 straight female bsp adaptor 24226 page 9.5.001.03 straight connector 24020 page 9.5.001.04 elbow connectors and adaptors elbow female bsp adaptor 24246 page 9.5.001.04 elbow male adaptor taper bsp 24145 page 9.5.001.04 elbow connector swivel elbow adaptor 24040 page 9.5.001.04 24247 page 9.5.001.04 elbow banjo assembly 24a51 page 9.5.001.08 tee connectors and adaptors tee male bsp adaptor taper - off set leg 24175 page 9.5.001.05 tee male bsp adaptor taper - centre leg 24165 page 9.5.001.05 tee connector equal cross connector 24060 page 9.5.001.05 24090 page 9.5.001.05 tee banjo assembly 24a71 page 9.5.001.08 banjo bodies and bolts & accessories double banjo body 24071 page 9.5.001.05 banjo stem single long bolt banjo stem double long bolt 24a00 24b00 page 9.5.001.06 page 9.5.001.06 single banjo body banjo stem triple long bolt banjo flow regulator screwdriver regulation banjo flow regulator regulating out bolt banjo flow regulator bi-directional flow bolt banjo flow regulator regulating in bolt 24051 24c00 24k51 24k 24m 24l page 9.5.001.05 page 9.5.001.06 page 9.5.001.07 page 9.5.001.07 page 9.5.001.07 page 9.5.001.07 tubing nut plug 24001 24005 page 9.5.001.08 page 9.5.001.08 banjo stem single short bolt banjo stem double short bolt 24a00 page 9.5.001.06 24b00 page 9.5.001.06 24c00 page 9.5.001.06 banjo stem triple short bolt
product for use bcde number with a/f tube od/id 241250418 4/2,5 1 8 7,5 23,0 12 241250518 5/3 1 8 7,5 23,0 12 241250618 6/4 1 8 7,5 25,6 12 241250628 6/4 1 4 11,0 29,6 14 241250638 6/4 3 8 11,5 30,0 17 241250818 8/6 1 8 7,5 26,9 14 241250828 8/6 1 4 11,0 30,9 14 241250838 8/6 3 8 11,5 31,4 17 241250848 8/6 1 2 14,0 34,0 22 241251018 10/8 1 8 7,5 29,0 14 241251028 10/8 1 4 11,0 33,0 14 241251038 10/8 3 8 11,5 33,5 17 241251048 10/8 1 2 14,0 36,5 22 241251238 12/10 3 8 11,5 35,0 17 241251248 12/10 1 2 14,0 38,0 22 241251548 15/12,5 1 2 14,0 40,0 22 02/98 n/al 9.5. 001.03 push-on tube fittings our policy is one of continuous research and development. we therefore reserve the right to amend, without notice, the specifications given in this document. method of assembly 1. ensure that the end of the tube is cut square and is free from burrs. 2. place the knurled nut over the tube. 90? 3. push the tube over the barbed end of the fitting up to the tube stop. 4. screw the knurled nut onto the fitting until finger tight. the hexagon on the nut is to aid release. d e c b tube to male bsp parallel thread straight male adaptor d e c b tube to male taper bsp thread straight male adaptor 24125 24225 24226 24225 d b e c straight female adaptor d e c b tube to male metric thread tube to female bsp parallel thread straight male adaptor product for use bcde number with a/f tube od/id 242250405 4/2,5 m5 4 19,5 8 242250505 5/3 m5 4 22,1 8 242250605 6/4 m5 4 22,1 8 product for use bcde number with a/f tube od/id 242260618 6/4 1 8 7,5 23,3 14 242260628 6/4 1 4 11,0 27,0 17 242260638 6/4 3 8 11,5 28,0 22 242260818 8/6 1 8 7,5 24,7 14 242260828 8/6 1 4 11,0 28,7 17 242260838 8/6 3 8 11,5 29,2 22 242260848 8/6 1 2 15,0 33,0 24 242261028 10/8 1 4 11,0 30,5 17 242261038 10/8 3 8 11,5 33,3 22 242261048 10/8 1 2 15,0 34,5 24 product for use bcde number with a/f tube od/id 242250418 4/2,5 1 8 6 21,5 13 242250518 5/3 1 8 6 24,1 13 242250618 6/4 1 8 6 24,1 13 242250628 6/4 1 4 8 26,6 17 242250638 6/4 3 8 9 27,6 19 242250648 6/4 1 2 10 30,0 24 242250818 8/6 1 8 6 25,4 14 242250828 8/6 1 4 8 27,9 17 242250838 8/6 3 8 9 28,9 19 242250848 8/6 1 2 10 30,0 24 242251018 10/8 1 8 6 27,5 14 242251028 10/8 1 4 8 30,0 17 242251038 10/8 3 8 9 31,0 19 242251048 10/8 1 2 10 32,5 24 242251238 12/10 3 8 9 32,5 19 242251248 12/10 1 2 10 34,0 24 242251548 15/12,5 1 2 10 36,0 24 supplied complete with sealing washer supplied complete with sealing washer
n/al 9.5. 001.04 02/98 push-on tube fittings our policy is one of continuous research and development. we therefore reserve the right to amend, without notice, the specifications given in this document. product for use tube de number with a/f tube od/id 240200400 4/2,5 27,5 8 240200500 5/3 31,7 10 240200605 6/4 5/3 32,2 12 240200600 6/4 32,2 12 240200806 8/6 6/4 33,5 12 240200800 8/6 34,8 12 240201000 10/8 39,0 14 240201200 12/10 43,0 17 240201500 15/12,5 47,0 22 d e b bulkhead connector d e straight connector 24020 24029 product for use bde number with a/f tube od/id 240290400 4/2,5 m6x0,5 39,6 9 240290500 5/3 m7x0,75 39,6 9 240290605 6/4 x 5/3 m10x1 45,5 14 240290600 6/4 m10x1 45,5 14 240290806 8/6x 6/4 m12x1 47,3 17 240290800 8/6 m12x1 48,4 17 240291000 10/8 m14x1 54,0 17 240291200 12/10 m16x1 57,0 19 240291500 15/12,5 m20x1 59,0 24 product for use b c d1 d2 e number with a/f tube od/id 241450418 4/2,5 1 8 7,5 18,5 15,0 8 241450518 5/3 1 8 7,5 18,5 15,0 8 241450618 6/4 1 8 7,5 18,5 15,0 8 241450628 6/4 1 4 11,0 20,6 19,0 8 241450638 6/4 3 8 11,5 21,0 20,5 9 241450818 8/6 1 8 7,5 19,9 16,5 9 241450828 8/6 1 4 11,0 21,9 19,0 9 241450838 8/6 3 8 11,5 23,4 21,0 9 241450848 8/6 1 2 14,0 23,4 28,0 16 241451018 10/8 1 8 7,5 24,0 18,0 11 241451028 10/8 1 4 11,0 24,0 22,0 11 241451038 10/8 3 8 11,5 25,5 22,0 11 241451048 10/8 1 2 14,0 25,5 28,0 16 241451238 12/10 3 8 11,5 27,0 22,5 13 241451248 12/10 1 2 14,0 27,0 28,0 16 241451548 15/12,5 1 2 14,0 31,5 28,0 16 d1 d2 e b c elbow female adaptor d2 e c d1 b tube to male taper bsp thread tube to tube tube to parallel female bsp thread tube to tube tube to tube elbow male adaptor 24145 24246 product for use b c d1 d2 e number with a/f tube od/id 242460518 5/3 1/8 7,5 20,6 18 8 242460618 6/4 1/8 7,5 20,6 18 8 242460628 6/4 1/4 11,0 21,2 21 9 242460818 8/6 1/8 7,5 21,9 19 9 242460828 8/6 1/4 11,0 23,4 21 9 242461028 10/8 1/4 11,0 25,5 22 11 242461038 10/8 3/8 11,5 25,5 25 14 product for use de number with a/f tube od/id 240400400 4/2,5 20,0 8 240400500 5/3 20,6 8 240400600 6/4 20,6 8 240400806 8/6-6/4 21,9 9 240400800 8/6 21,9 9 240401000 10/8 25,5 11 240401200 12/10 27,0 13 240401500 15/12,5 33,5 16 d d e elbow connector 24040 tube to male bspp product for use a b c d e f number with bspp a/f a/f tube od/id 242470618 6/4 1 8 6 20,6 20 8 14 242470628 6/4 1 4 8 20,6 22 8 17 242470818 8/6 1 8 6 21,6 20 9 14 242470828 8/6 1 4 8 23,1 23 9 17 242471028 10/8 1 4 8 24 241117 c d e f a b swivel elbow adaptor 24247 supplied complete with sealing washer
02/98 n/al 9.5. 001.05 push-on tube fittings our policy is one of continuous research and development. we therefore reserve the right to amend, without notice, the specifications given in this document. d d e tube to tube equal cross connector b d e tee connector 24060 24090 product for use de number with a/f tube od/id 240900500 5/3 41,6 8 240900600 6/4 41,6 8 240900800 8/6 44,4 9 240901000 10/8 51,0 11 240901200 12/10 58,0 13 240901500 15/12,5 64,0 17 product for use bde number with a/f tube od/id 240600400 4/2,5 38,5 19,5 8 240600500 5/3 41,2 20,6 8 240600600 6/4 41,2 20,6 8 240600806 8/6 - 6/4 43,8 20,6 9 240600800 8/6 43,8 21,9 9 240601006 10/8 - 6/4 51,0 20,6 11 240601008 10/8 - 8/6 51,0 21,9 11 240601000 10/8 51,0 25,5 11 240601200 12/10 54,0 28,0 13 240601500 15/12,5 63,0 32,5 16 product for use thread b c s d number with tube od/id 240510405 4/2,5 m5 5,1 9,0 9,0 16,5 240510406 4/2,5 m5 6,1 9,0 9,0 16,5 240510418 4/2,5 1/8 10,0 14,0 14,5 23,3 240510505 5/3 m5 5,1 9,0 9,0 16,5 240510506 5/3 m5 6,1 9,0 9,0 16,5 240510518 5/3 1/8 10,0 14,0 14,5 23,3 240510605 6/4 m5 5,1 9,0 9,0 16,5 240510606 6/4 m5 6,1 9,0 9,0 16,5 240510618 6/4 1/8 10,0 14,0 14,5 23,3 240510628 6/4 1/4 13,3 18,0 14,5 25,3 240510638 6/4 3/8 16,6 21,0 14,5 26,8 240510818 8/6 1/8 10,0 14,0 14,5 24,7 240510828 8/6 1/4 13,3 18,0 14,5 27,6 240510838 8/6 3/8 16,6 21,0 14,5 27,7 240510848 8/6 1/2 21,0 26,0 14,5 31,2 240511018 10/8 1/8 10,0 14,0 14,5 27,5 240511028 10/8 1/4 13,3 18,0 14,5 29,5 240511038 10/8 3/8 16,6 21,0 14,5 30,5 240511048 10/8 1/2 21,0 26,0 14,5 34,0 240511238 12/10 3/8 16,6 21,0 14,5 31,5 240511248 12/10 1/2 21,0 26,0 14,5 35,0 240511548 15/12,51 1/2 21,0 26,0 14,5 36,5 c b d s double banjo body d c b s single banjo body 24051 24071 product for use bcsd number with tube od/id 240710405 4/2,5 - m5 5,1 9 9,0 33,0 240710418 4/2,5 - 1/8 10,0 14 14,5 46,6 240710505 5/3 - m5 5,1 9 9,0 33,0 240710518 5/3 - 1/8 10,0 14 14,5 46,6 240710605 6/4 - m5 5,1 9 9,0 33,0 240710618 6/4 - 1/8 10,0 14 14,5 46,6 240710628 6/4 -1/4 13,3 18 14,5 50,6 240710638 6/4 - 3/8 16,6 21 14,5 53,6 240710818 8/6 - 1/8 10,0 14 14,5 49,4 240710828 8/6 - 1/4 13,3 18 14,5 55,2 240710838 8/6 - 3/8 16,6 21 14,5 55,4 240710848 8/6 - 1/2 21,0 26 14,5 61,0 240711018 10/8 - 1/8 10,0 14 14,5 53,0 240711028 10/8 - 1/4 13,3 18 14,5 59,0 240711038 10/8 - 3/8 16,6 21 14,5 61,0 240711048 10/8 - 1/2 21,0 26 14,5 68,0 240711238 12/10 - 3/8 16,6 21 14,5 63,0 240711248 12/10 - 1/2 21,0 26 14,5 70,0 240711548 15/12,5 -1/2 21,0 26 14,5 73,0 product for use b c d1 d2 e number with a/f tube od/id 241650418 4/2,5 1 8 7,5 37,0 15,0 8 241650518 5/3 1 8 7,5 37,2 15,0 8 241650618 6/4 1 8 7,5 37,2 15,0 8 241650628 6/4 1 4 11,0 41,2 19,0 9 241650818 8/6 1 8 7,5 39,8 16,5 9 241650828 8/6 1 4 11,0 43,8 20,5 9 241651018 10/8 1 8 7,5 48,0 18,0 11 241651028 10/8 1 4 11,0 48,0 22,0 11 241651038 10/8 3 8 11,5 51,0 22,0 11 241651238 12/10 3 8 11,5 54,0 22,5 13 241651548 15/12,5 1 2 14,0 63,0 28,0 16 d1 e c d2 b tube to male taper bsp side leg tube to tube tee male adaptor d1 e b c d2 tube to male taper bsp centre leg tee male adaptor 24165 24175 product for use b c d1 d2 e number with a/f tube od/id 241750518 5/3 1 8 7,5 36,7 20,6 8 241750618 6/4 1 8 7,5 36,7 20,6 8 241750628 6/4 1 4 11,0 40,2 20,6 8 241750818 8/6 1 8 7,5 38,0 21,9 9 241750828 8/6 1 4 11,0 41,5 21,9 9 241751018 10/8 1 8 7,5 41,5 25,5 11 241751028 10/8 1 4 11,0 45,0 25,5 11 241751038 10/8 3 8 11,5 45,5 25,5 11 241751238 12/10 3 8 11,5 48,5 28,0 13 241751548 15/12,5 1 2 14,0 57,5 32,5 16 ? ? ? ? to be used with bolts marked *alongside.
n/al 9.5. 001.06 02/98 push-on tube fittings our policy is one of continuous research and development. we therefore reserve the right to amend, without notice, the specifications given in this document. d e b 8,5 16 a short banjo stem double e b a c d short banjo stem single 24a00 24b00 product a b d e number a/f 24b000018 1 8 6 43,0 14 24b000028 1 4 8 46,0 17 24b000038 3 8 9 46,5 19 24b000048 1 2 10 47,5 24 product a b c d e number a/f 24a000005 m5 4 4,5 18,0 8 24a000018 1 8 6 8,5 27,5 14 24a000028 1 4 8 8,5 30,0 17 24a000038 3 8 9 8,5 30,5 19 24a000048 1 2 10 8,5 31,5 24 d e b 12,5 a long banjo stem single 8,5 16 d b e 16 a short banjo stem triple 24c00 24a00 product a b d e number bspt a/f 24a00l018 1 8 6 31,0 14 24a00l028 1 4 8 33,5 17 24a00l038 3 8 9 34,5 19 24a00l048 1 2 10 35,5 24 product a b d e number a/f 24c000018 1 8 6 59,0 14 24c000028 1 4 8 62,0 17 24c000038 3 8 9 62,5 19 24c000048 1 2 10 63,5 24 e b a 12,5 25 25 d long banjo stem triple d b 12,5 e 25 a long banjo stem double 24b00 24c00 product a b d e number a/f 24c00l018 1 8 6 81,0 14 24c00l028 1 4 8 83,5 17 24c00l038 3 8 9 84,5 19 24c00l048 1 2 10 85,5 24 product a b d e number a/f 24b00l018 1 8 6 56,0 14 24b00l028 1 4 8 58,5 17 24b00l038 3 8 9 59,5 19 24b00l048 1 2 10 60,5 24
02/98 n/al 9.5. 001.07 push-on tube fittings our policy is one of continuous research and development. we therefore reserve the right to amend, without notice, the specifications given in this document. screwdriver regulation flow regulator regulating out banjo flow regulators operating pressure 0 -10 bar 24k51 product o/d a c d e number tube a/f 24k510405 4/2,5 m5 16,5 24,0 8,0 24k510418 4/2,5 1/8 23,3 30,5 14,0 24k510605 6/4 m5 16,5 24,0 8,0 24k510618 6/4 1/8 23,3 30,5 14,0 24k510628 6/4 1/4 25,3 30,5 17,0 24k510818 8/6 1/8 24,7 30,5 14,0 24k510828 8/6 1/4 27,6 35,5 17,0 24k511028 10/8 1/4 29,5 35,5 17,0 a c b d e regulating out 24k00 product a b c d e number a/f *24k000005 m5 4,0 12,5 24,0 8,0 24k000018 1/8 5,5 14,5 30,5 14,0 24k000028 1/4 8,5 14,5 35,5 17,0 c e b d a regulating in 24l00 product a b c d e number a/f *24l000005 m5 4,0 12,5 24,0 8,0 24l000018 1 8 5,5 14,5 30,5 14,0 24l000028 1 4 8,5 14,5 35,5 17,0 c e b d a bi-directional flow 24m00 product a b c d e number a/f *24m000005 m5 4,0 12,5 24,0 8,0 24m000018 1 8 5,5 14,5 30,5 14,0 24m000028 1 4 8,5 14,5 35,5 17,0 1 2 3 4 5 6 7 8 9 101112131415 2 4 6 8 10 12 14 16 18 20 21 22 23 24 26 28 30 32 34 36 38 40 42 44 air rate q at 0? and 1013 mbar (ni/min) 0 number of turns of the adjusting needle adjustable restrictor valves m5 (dn1.5) supply pressure = 7 bar p = 1 bar 1 2 3 4 5 6 7 8 9 101112131415 20 40 60 80 100 120 140 160 180 200 210 220 230 240 260 280 300 320 340 360 380 400 420 440 air rate q at 0 c and 1013 mbar (ni/min) 0 number of turns of the adjusting needle adjustable restrictor valves 1/4 (dn3.5) supply pressure = 7 bar p = 1 bar 1 2 3 4 5 6 7 8 9 101112131415 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 air rate q at 0 c and 1013 mbar (ni/min) 0 number of turns of the adjusting needle adjustable restrictor valves 1/8 (dn2) supply pressure = 7 bar p = 1 bar d c e a * to be used with bodies marked ? alongside * to be used with bodies marked ? alongside * to be used with bodies marked ? alongside adjustable restrictor valves 1/8 (dn2) supply pressure = 7 bar ? p = 1 bar adjustable restrictor valves 1/4 (dn3.5) supply pressure = 7 bar ? p = 1 bar adjustable restrictor valves m5 (dn1.5) supply pressure = 7 bar ? p = 1 bar
n/al 9.5. 001.08 02/98 push-on tube fittings our policy is one of continuous research and development. we therefore reserve the right to amend, without notice, the specifications given in this document. non regulating bolt tee banjo assembly a b f c d e f c d e a b non regulating bolt elbow banjo assembly 24a51 24a71 product tube a b c d e f number size thr da/f 24a710405 4/2,5 m5 9,0 33,0 9,0 18,0 8 24a710505 5/3 m5 9,0 33,0 9,0 18,0 8 24a710605 6/4 m5 9,0 33,0 9,0 18,0 8 24a710418 4/2,5 1 8 14,0 46,6 14,5 27,5 14 24a710518 5/3 1 8 14,0 46,6 14,5 27,5 14 24a710618 6/4 1 8 14,0 46,6 14,5 27,5 14 24a710818 8/6 1 8 14,0 49,4 14,5 27,5 14 24a710628 6/4 1 4 18,0 50,6 14,5 30,0 17 24a710828 8/6 1 4 21,0 53,6 14,5 30,5 19 24a710638 6/4 3 8 21,0 53,6 14,5 30,0 17 24a710838 8/6 3 8 21,0 55,4 14,5 30,5 19 24a710848 8/6 1 2 26,0 61,0 14,5 31,5 24 24a711028 10/8 1 4 18,0 59,0 14,5 30,0 17 24a711238 12/10 3 8 21,0 63,0 14,5 30,5 19 24a711248 12/10 1 2 26,0 70,0 14,5 31,5 24 product tube a b c d e f number size thread a/f 24a510405 4/2,5 m5 9,0 16,5 9,0 18,0 8 24a510505 5/3 m5 9,0 16,5 9,0 18,0 8 24a510605 6/4 m5 9,0 16,5 9,0 18,0 8 24a510418 4/2,5 1 8 14,0 23,3 14,5 27,5 14 24a510518 5/3 1 8 14,0 23,3 14,5 27,5 14 24a510618 6/4 1 8 14,0 23,3 14,5 27,5 14 24a510818 8/6 1 8 14,0 24,7 14,5 27,5 14 24a510628 6/4 1 4 18,0 25,3 14,5 30,0 17 24a510828 8/6 1 4 18,0 27,6 14,5 30,0 17 24a511028 10/8 1 4 18,0 29,5 14,5 30,0 17 24a510638 6/4 3 8 21,0 26,8 14,5 30,5 19 24a510838 8/6 3 8 21,0 27,7 14,5 30,5 19 24a511238 12/10 3 8 21,0 31,5 14,5 30,5 19 24a511248 12/10 1 2 26,0 35,0 14,5 31,5 24 a b tubing nut 24001 plug 24005 product tube a b number size thread 240010400 4/2,5 m6 x 0,5 10,0 240010500 5/3 m7 x 0,75 10,0 240010600 6/4 m10 x 1,0 11,0 240010800 8/6 m12 x 1,0 11,5 240011000 10/8 m14 x 1,0 13,5 240011200 12/10 m16 x 1,0 15,0 240011500 15/12,5 m20 x 1,0 16,0 supplied complete with sealing washer supplied complete with sealing washer warning these products are intended for use in industrial compressed air systems only. do not use these products where pressures and temperatures can exceed those listed under technical data . before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or o ther applications not within published specifications, consult norgren. through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. the system designer is w arned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent pe rsonal injury or damage to equipment in the event of such failure. system designers must provide a warning to end users in the system instructional manual if protection against a failure mode ca nnot be adequately provided. system designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with th ese products where applicable. a c d a/f b product tube a b c d number size thread a/f hex 240050400 4/3 10,5 3,5 m6 x 0,5 8,0 240050600 6/4 11,5 4,0 m10 x 1,0 12,0 240050800 8/6 13,5 4,0 m12 x 1,0 14,0
|
